Actions taken on the SmartLine Controller must be received by the SmartLink web application. Similarly, actions taken in the SmartLink web application must be sent to the controller. This happens automatically once every 24-hours through a regular nightly update. However, you can send or receive commands manually at any time.
RECEIVE: Found at the top right of each SmartLink page. This action updates the SmartLink web application with the latest data from the controller.
SAVE: Found at the bottom of each programming area on the SmartLink controller page. This action saves programming changes made on the SmartLink Network to the web application, but you still need to SEND to the controller.
SEND: Found at the top right of the SmartLink controller page once a change has been saved to SmartLink. This action updates the controller with programming changes saved in SmartLink.
Saved changes not sent to the controller will be overwritten when RECEIVE is used or during the regular nightly update to website update.
Article is closed for comments.