SmartLink Aircards require a compatible SmartLine control panel. To find your SmartLine control panel version, turn the dial down to the Advanced Functions Menu, press Down a few times to ABOUT and press Next. If you see MODEL, press Down once to VERSION and press Next.
- SmartLink is supported by SmartLine control panel versions 3.10 and greater. If you have version 3.30 or greater, no changes are required.
- SmartLine control panels that are older than 3.10 cannot be used and will require a new panel. Panels can be purchased through your Authorized Weathermatic Distributor (part number: SLCPSA-G5). It is not necessary to replace the entire controller. You can simply remove the panel from the hinge and replace with a new compatible panel.
You can also check in the bottom left of your panel for the words "SmartLink Network Ready" meaning it's compatible with a SmartLink Aircard. The picture below shows an example of that.