How to Set a Custom Internal Sensor Loop Name in SmartLink

Learn how to set a custom name for the internal sensor loop in SmartLink Network by following the instructions below

Step 1: Log In and Select Your Controller

1. Go to smartlinknetwork.com and enter your login credentials to access your account.
2. On the Site Page, find the search bar and type in and select your Site Name from the search results.
3. Then click on the Controller name
   -OR-
4. Locate the Controller List at the top, then find and click the Controller name.

Step 2: Access the Advanced Menu

1. Navigate to the Advanced Menu tab on the Controller Page.

Step 3: Rename the Internal Sensor

1. Locate the field labeled Sensor Loop Custom Name.
2. Click inside the field and enter the desired name that best describes the sensor's function, such as Anemometer or Float Switch (Normally Open).

Step 4: Save and Apply Changes

1. After entering the custom name, scroll down and click Save Advanced Settings.
2. The updated sensor name will now be displayed on your SmartLink Controller page.
3. Confirm that your updates were saved successfully by refreshing and checking the updated name on the Controller Page.

Still Need Help?

If you have any questions, please email us at support@weathermatic.com or call us at 888-484-3776.

Thank you!

https://app.snapcall.io/weathermatic