How to Adjust the MV2 to Zone Delay in SmartLink

Learn how to Adjust the Master Valve 2 Zone Delay in SmartLink Network by following the instructions below

Step 1: Log In and Select Your Controller

1. Go to smartlinknetwork.com and enter your login credentials to access your account.
2. On the Site Page, find the search bar and type in and select your Site Name from the search results.
3. Then click on the Controller name
   -OR-
4. Locate the Controller List at the top, then find and click the Controller name.

Step 2: Access the Advanced Menu

1. Navigate to the Advanced Programming / Menu tab on the Controller Page.

Step 3: Adjust the Master Valve 2 to Zone Delay

1. Find the Master Valve 2 to Zone Delay setting.
2. Adjust the delay time to your preference. This setting will bring the master valve on 2 seconds before the zone valves to pressurize the main line.
3. You can also set it to 0 seconds to bring the master valve on at the same time as the zone valves.
4. Weathermatic recommends keeping the factory default setting of 2 seconds.

Step 4: Save and Send Changes

1. After making your adjustments, click Save Advanced Settings.
2. Click Send to apply the changes to your controller.
3. Confirm that your updates were sent successfully by checking for a green Successfully Sent banner.

Still Need Help?

If you have any questions, please email us at support@weathermatic.com or call us at 888-484-3776.

Thank you!

https://app.snapcall.io/weathermatic