How to Set Zone Run Times in SmartLink

Learn how to set zone run times in SmartLink Network by following the instructions below

Step 1: Log In and Select Your Controller

1. Go to smartlinknetwork.com and enter your login credentials to access your account.
2. On the Site Page, find the search bar and type in and select your Site Name from the search results.
3. Then click on the Controller name
   -OR-
4. Locate the Controller List at the top, then find and click the Controller name.

Step 2: Access Zone Runtime Settings

1. On the Controller Page, navigate to the Programming tab.
2. Expand the Zone Run Times section.
3. Click Edit Zone Run Times to access the zone runtime settings.

Step 3: Adjust Zone Run Times

1. Review the list of irrigation zones under their corresponding programs (Program A, B, C, or D).
2. Locate the Zone Runtime column.
3. Click the pencil icon next to the zone you want to adjust.
4. Select the desired runtime from the drop down menu. You can choose durations from 1 minute to 9 hours and 55 minutes.
5. Click Save to confirm your changes.

Pro Tip:

• Customize zone names to reflect the sprinkler type or location. This can be done by editing the zone name, which will then appear on the Controller Page for easy reference.
• If using Smart Mode, the controller will automatically adjust run times based on real-time weather data.

Step 4: Send Changes to Your Controller

1. After making adjustments, click Stop Editing to confirm.
2. Click the Send button to sync the updated run times to your controller.
3. Ensure the communication is successful by checking for the green Successfully Sent banner.

Still Need Help?

If you have any questions, please email us at support@weathermatic.com or call us at 888-484-3776.

Thank you!

https://app.snapcall.io/weathermatic