Learn how to adjust your More/Less Smart Mode Settings in SmartLink Network by following the instructions below
Step 1: Log In and Select Your Controller
- Go to smartlinknetwork.com and enter your login credentials to access your account.
- On the Site Page, find the search bar and type in and select your Site Name from the search results.
- Then click on the Controller name
-OR- - Locate the Controller List at the top, then find and click the Controller name.
Step 2: Access Smart Mode Settings
- Scroll down to the Programming Section
- Click on the Smart Mode (Auto-Adjust) drop down box
- Click on Edit Smart Settings to enable modifications.
Step 3: Adjust the More/Less Settings
- If you’ve already set up your controller’s Smart Settings with information like your ZIP code, latitude, sprinkler type, and plant type, you’ll see those details.
- To adjust only the More/Less settings, continue without modifying the other information.
Step 4: Understanding the Adjustments
- The More/Less setting allows you to increase or decrease zone run times.
- For example:
- A +25% adjustment increases a 10-minute runtime to approximately 12.5 minutes.
- A -50% adjustment reduces a 10-minute runtime to about 5 minutes.
- Keep in mind that Smart Mode recalculates daily, so adjustments won’t be exact but will follow your settings as a guideline.
Step 5: Save and Send Changes
- After making your adjustments, click Stop Editing to save your changes.
- At the top of the page, click Send to transmit the updates to your panel.
- A confirmation banner saying Successfully Sent will appear within 10 to 60 seconds.
- If not and a Red Failed banner shows up, wait 1 minute and send again
Still Need Help?
If you have any questions, please email us at support@weathermatic.com or call us at 888-484-3776.
Thank you!
https://app.snapcall.io/weathermatic