How to Set the Time and Date in SmartLink Network

Learn how to set the time and date through SmartLink Network and communicate the change to your panel by following the instructions provided below

Step 1: Log In and Select Your Controller

1. Go to smartlinknetwork.com and enter your login credentials to access your account.
2. On the Site Page, find the search bar and type in and select your Site Name from the search results.
3. Then click on the Controller name with the Time Error
   -OR-
4. Locate the Controller List at the top, then find and click the Controller name.

Step 2: Adjust the Date and Time

1. Click on Edit Settings under the Watering mode.
2. Locate the Controller Date section.
3. Select the appropriate Month, Day, and Year using the available drop-down options.
4. Adjust the Hour and Minutes using the provided fields.
5. Choose AM or PM as needed.

Step 3: Set the Time Zone

1. Ensure the correct Time Zone is selected for the controller's geographic location.
2. Important: Failing to select the correct time zone can result in errors and incorrect time reporting.

Step 4: Save and Send the Update

1. After making your adjustments, click Save.
2. A Send button will appear to the right.
3. Click Send to push the updates from the cloud to the controller panel.
4. A blue banner will indicate the communication is in progress.
5. Wait for the Green Success Banner to confirm the update was completed.

Step 5: Confirm the Update

1. Verify the date and time on the controller to ensure the update was successful.

Still Need Help?

If you have any questions, please email us at support@weathermatic.com or call us at 888-484-3776.

Thank you!

https://app.snapcall.io/weathermatic